- Remove wheels and inspect brake pads and rotors for condition and thickness. Front: Pad 2MM, Rotors within spec but have heat spots. Rear: Pad 4MM, Rotor WIthin spec
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Check entire brake system including master cylinder, calipers, wheel cylinders until clean.
- Replaced front brake pads and rotors, Lubricated hard wear and flushed brake fluid. Road tested vehicle and confirmed proper operation. When replacing brake components brake pedal may feel different and stopping distance may be longer then it was. Allow extra distance while stopping for proper brake in process.
Claudine V. gave our service a 5 star review on 11/11/2023